Sustainable and Productive tool wash systems for construction trades
Eliminate the plumbing connections and hassle from interceptor style washout drums
-
SAVE $$
-
SAVE WATER
-
ELIMINATE LIQUID WASTE
-
DECARBONISE TOOL WASHING ACTIVIIES
-
IMPROVE COMPLIANCE AND PRODUCTIVITY
Eliminate these nasty sewer drums that are polluting our environment
These drums discharge uncontrolled pollution to the environment via the sewer.
Problems associated with this type of washout
-
Blocked building plumbing
-
Pollution goes straight to the environment via the sewer
-
Costly to install and difficult to maintain and empty
-
Leaking drums and plumbing cause mould and water ingress problems around the site
-
Safety issues removing them at the end of the project
-
They are inneffective as a wash station for trades which causes lost time
Washbox allows trades to clean these tools without polluting the environment
INCREASE SITE PRODUCTIVITY WITH WASHBOX
2 VERSIONS FOR HIRE IN AUSTRALIA | USA | UK
Washbox is a tool wash system that uses its own recycled water to provide tool washing for ALL construction trades. The tool wash system can be used by Painters, Plasterers, Blocklayers, Tilers and any trades person that needs to wash their tools in water. Washbox captures the solids in its filter system for easy disposal and recycles the washwater for continuous use. The water supply does not need replacing and there are no plumbing connections required for water supply or discharge making the system fully mobile.
200T Series Washbox on a trolley
Fully automated and fully mobile
The 200T Series Washbox is ideal for office fitouts, refurbishments projects and construction sites where tight access equipment is required. easily pushed around site by 1 man, just fill with water and plug in to work. No plumbing connections required to provide tool washing recycled water anywhere on site.
500P Series Washbox on a pallet
Fully automated and relocatable
The 500P series Washbox is ideal for larger construction sites. With a capacity for around 40 tradespeople washing tools and relocatable using a forklift or pallet jack, this system can provide tool washing without the need for any plumbing connections anywhere onsite there is ordinary power.
WASHBOX IS A CLOSED LOOP WATER RECYCLING AND WASTE RECOVERY SYSTEM SYSTEM
HERES HOW IT WORKS
Its a purpose built device that will save your trades time and give them cleaner tools and you a better finish
Watch our 3D animations of the Washbox cycle
See how Washbox automatically recycles its own water supply and transfers waste to its filters that can easily be emptied onsite. See how Washbox uses one single tank of recycled water to provide tool washing for your entire project.
No plumbing connections or sewer discharge is required which makes Washbox the most mobile and product trades wash station available.
200T Series Washbox on a trolley
Fully automated and fully mobile
The 200T Series Washbox is ideal for office fitouts, refurbishments projects and construction sites where tight access equipment is required. easily pushed around site by 1 man, just fill with water and plug in to work. No plumbing connections required to provide tool washing recycled water anywhere on site.
500P Series Washbox on a pallet
Fully automated and relocatable
The 500P series Washbox is ideal for larger construction sites. With a capacity for around 40 tradespeople washing tools and relocatable using a forklift or pallet jack, this system can provide tool washing without the need for any plumbing connections anywhere onsite there is ordinary power.
The Benefits of Washbox
SAVE WATER
ELIMINATE LIQUID WASTE
REDUCE DEFECTS FROM BLOCKED PLUMBING
REDUCE YOUR CARBON FOOTPRINT
GUARANTEE COMPLIANCE WITH TRADE WASTE REGULATIONS
BETTER HOUSEKEEPING AND SITE SAFETY
BETTER PRODUCTIVITY
Washbox replaces these outdated setups
Eliminate hazardous washout drums
This plumber installed washout system is not only ineffective, hazardous and expensive but probably doesn't meet compliance requirements in your region. They can cost $2000 per floor to setup and remove and it all becomes landfill at the end of the project.
This entire setup becomes solid waste a the end of the project, adding to your sites carbon footprint and waste totals.
Eliminate rotten smelling waste
No more wet waste lying around in bins
The wet waste in these slop bins is a toxic breeding ground for bacteria and dangerous chemicals such as hydrogen sulfide. These slop bins are heavy, sloppy, messy and difficult to remove from site causing unnecessary safety risks.
No more toxic polluted water lying around your site
These pollution drums often cause blocked plumbing and leak / overflow causing defects in the work area and are an ineffective way for trades to wash their tools.
Green Building
GREEN STAR / LEED / BREEAM
Acquire Points with Washbox
If your project is targeting Green Star, LEED or BREEAM
certification then ask us how Washbox makes you eligible for innovation points.
Life Cycle Assessment
Washbox will decarbonise your washout activity on site
Because each Washbox is used on multiple sites over many years and eliminates the need to install temporary drums and plumbing its carbon footprint is much less than the standard practice wier systems. If you want to reduce the carbon footprint of your washout activity then choose Washbox.
Impact Reduction / GECA
How does Washbox impact on your environemtnal footprint
Human Health impact reduction: 63%
Ecosystem impact reduction: 77%
Resources impact reduction: 93%
Trusted by.
About Us
Washbox was invented in Australia in 2006 and is the worlds leading on site tool wash solution for hire.
Washbox is proudly made in Australia and exported to the world.